guards RSS

flo motorsports, flomotorsports, forks, guards, install, moto, supercross -

Step 1: Remove forks, clean & dry thoroughly using a contact cleaner or a small amount of washing liquid. For best results, make sure forks are smooth without any stone chips, etc. Step 2: After checking you have the correct sleeve on the correct fork leg, slide into position and check the bleed screw on the top of the leg so that it faces forwards and ensure the sleeve logo faces outwards. Make sure the sleeve slides down over both of the forkseal ridges. Step 3: With the heat gun set to a medium to high heat, starting on the...

Read more