bike RSS
Triple Crown Anaheim 2
With the championship returning to Angel Stadium, the Manluk Rock River Racing team knew that they could once again generate success while stationed in Anaheim, California. The number forty-four FLO Motorsports backed Yamaha of Benny Bloss would sprint into a series of practice laps, with emphasis on generating a time that was within the top-eighteen. Though the track was deteriorating rather quickly, the Missouri native would find a rhythm that had to be acknowledged by all in the 450cc division; as he was finalized in fifteenth prior to beginning the first (of three) main events. The Triple Crown format was...
Haiden Deegan (Supermini 1) 12-15 Champion 2021
FLO Motorsports backed rider "Danger Boy Deegan" equipped with 3.0 foot pegs came from 16th on the opening lap to win the final Supermini 1. His 1-1-1 moto finishes earning him the national title in the class. With our unique design and top quality German Grade Forged 7075 T6 Alloy Flo Motorsports foot pegs are some of the strongest pegs available on the market. 7075 T6 Alloy is a high strength true ‘aircraft’ aluminum alloy.
Yamaha YZ450F YZ450FX YZ250F YZ250FX Radiator Guards Installation
Instructions are for Installation of Flo Radiator guards for the following bikes. Yz450F 2018 - Current Year Yz450FX 2019 - Current Year Yz250F 2019 - Current Year Yz250FX 2020 - Current Year 1. Start by removing your Shroud Plastics. 2. Remove the O.E Plastic Radiator Louvers 3. Remove Upper Front Radiator bolt that mounts to the Frame. 4. Lineup the Flo Radiator Guards with OE radiators and Install The provided 30mm long Bolt and Washer to the Upper Front radiator/ Frame mount using a 10mm T -handle, DO NOT tighten all the way. 5. Reinstall the plastic Shrouds 6. Lineup...
Justin Bieber Rocking our Flo 3.0 Foot Pegs on his Custom Drew House KTM 500 EXC-F bike By Bleach Design Werks
Justin Bieber Rocking our Flo 3.0 Foot Pegs on his Custom Drew House KTM 500 EXC-F bike By Bleach Design Werks! With our unique design and top quality German Grade Forged 7075 T6 Alloy Flo Motorsports foot pegs are some of the strongest pegs available on the market. 7075 T6 Alloy is a high strength true ‘aircraft’ aluminum alloy. Its typical yield strength (73 KSI in the T6 condition) is comparable to certain steels giving the alloy a remarkably high strength-to-weight ratio. In fact, it’s worth noting that its specific strength is comparable to that of 6Al-4V Grade 5 Titanium. 7075 is roughly...
Cody Webb’s 2020 Sherco Factory SE300. Featuring Flo Motorsports Foot Pegs
This week Dirt Bike Magazine took a look at Cody Webb’s 2020 Sherco Factory SE300 featuring Flo Motorsports Foot Pegs! "If you are a fan of 300cc two-strokes check out the link at the bottom of this post to our YZ300 project. You won’t be disappointed !" Check out the full article here! : https://dirtbikemagazine.com/amp/cody-webbs-2020-sherco-factory-se300-two-stroke-tuesday/ By Mark Tilley on November 26, 2019 The Flo Motorsports pegs on Webb’s bike are 5mm lower and 5mm back compared to the OEM units. These pegs also have replaceable teeth.
Tags
- All
- bestfootpegs
- bike
- bikeweek
- Bleach Design Werks
- blog
- breastcancerawareness
- breastcancerawarenessmonth
- chopper
- chrome
- cleats
- codywebb
- counter shaft sprocket
- Custom
- Custom Bike
- dangerboydeegan
- dirt bike
- dirtbike
- Drew House
- enduro
- endurocross
- fatboy
- flo motorsports
- flomotorsports
- florider
- fmx
- foot pegs
- footpeg
- footpegs
- forks
- front sprocket
- frontsprocket
- gaines
- guards
- harley
- harley davidson
- harleydavidson
- harleydavidsonaddicts
- honda
- husqvarna
- Indianapolis
- install
- jetfuel
- jetfuelfootpegs
- kawasaki
- ktm
- luke renzland
- main event
- maintenance
- Monster energy
- moto
- motocross
- motocrosslifestyle
- motocrossrider
- motocrosstraining
- motorcycle
- mx
- pegs
- pennington
- podium
- pro 160 levers
- race
- rainbow
- rainbowfootpegs
- renzland
- rider
- riders
- risers
- rotor
- rotors
- sherco
- sprocket
- sprockets
- supercross
- suzuki
- sx
- tradersracing
- yamaha
