First, take off frame cover and foot peg.
Next, put the foot peg on with the pin sticking in just a little bit so the pegs stays in place.
Next, Take the spring and set it in with the “L” hook part pointed down.
Next, take a 10mm T-Handle (or you can use your thumb) and push down on the middle of spring until both ends of spring are set in place. While Keeping one hand pushing down on the T-handle, take a hammer with the other hand and hammer the pin through, both sides of the spring will hook in.
Here is the final result after you put the cotter pin and frame cover back on.
#motocrosss #install #dirtbike #ktm #footpegs #Husqvarna #pegs #flomotorsports #blog
